First I noticed that there was a crack in the trailer frame, so I took it to get welded.
When attaching the floor I discovered that the frame wasn't exactly square or flat.
Hopefully its no major and everything will sit OK in the end.
Also, when assembling the axle and bearings, I struggled to get them on properly which caused one of them to get damaged, so had to get another set.
Here is a useful link- if you haven't done it before probable save the time and frustration and get someone with right tools..
https://www.etrailer.com/faq-wheelbearingpack.aspx
The day I decided to haul the sides out of the shed and assemble them outside (It wouldn't fit assemble through the door), it looked like rain was on the way.
With both sides up and braced- sure enough it started to drizzle,
We had to cover it quickly at the interior MDF hates moisture. In the process the wind blew one of the sides over- but there was no damage. Phew!
